CONSTRUCTION OF PAVING STONES AND ITS INSTALLATION AT THE FRONT OF FACULTY OF ENGINEERING
1.0 INTRODUCTION
For driveways, patios, decks, and paths, interlocking brick design is the epitome of beauty and class. There are four types of interlocking bricks and screening construction. 1. Paving stone casting 2. Installation of interlocking bricks in automobile components 3. Screed
1. Casting of interlocking blocks: This covers the casting of interlocking bricks in a cement-to-aggregate ratio of 1:8 using casting plastics and oil for robbing the internal surface. 2. Installation of interlocking bricks in the parking lot: The interlocking bricks will be installed as follows:
(a) Installation planning
(b) Excavation
(c) Base preparation
(d) Brick hold placement (e) Sand bed (f) Paver placement (g) Paver cutting (h) Edging completion I Finishing the step 3. Screeding is the application of concrete on the surface floor, typically in a 4:1 sand/cement mix.
1.1 THE STUDY’S BACKGROUND
The use of interlocking brick as a paver is an example of environment design. Before interlocking brick can be installed as a paver, a broad knowledge of these courses must be acquired, and he or she must understand the fundamental concepts that govern interlocking brick design, such as
Soil mechanics geology
Engineering and technical illustration
(iii) Building material (iv) Research methodology (v) Material science and properties Before embarking on any construction project involving interlocking bricks, all of the above-mentioned courses are referred to as the principle of background study.
1.3 STUDY GOALS AND OBJECTIVES
The following are the research areas’ goals and objectives: I Understanding how to assemble an interlocking brick and its casting. (ii) A broad understanding of floor screening. (iii) To gain extensive experience in concrete mixing (iv) To learn a great deal more about environmental design (v) To use the front of the Engineering Faculty as a research center.
1.4 QUESTIONS FOR RESEARCH 1. What exactly are paving stones? 2. How do you make paving stones? 3. What are the various types of paving stone production? 4. What are the various types of paving stones? 5. What are the characteristics of paving stones? 5. Paving stone techniques? 6. How do you lay paving stones?
1.5 THE STUDY’S LIMITATIONS Paving stone design has really helped in pavement design, and generally sounds to the beauty of some specialized areas in surface design such as drive way, pools, patios, e.t.c. but still affected by some areas which are not perfectly monitored, the construction project was limited with the following things.
Ineffective project manager
Engineers or builders who are incompetent
Inadequate and imprecise research (iv)
(v) a lack of discipline due to a lack of equipment
Do You Have New or Fresh Topic? Send Us Your Topic
CONSTRUCTION OF PAVING STONES AND ITS INSTALLATION AT THE FRONT OF FACULTY OF ENGINEERING
INSTRUCTIONS AFTER PAYMENT
- 1.Your Full name
- 2. Your Active Email Address
- 3. Your Phone Number
- 4. Amount Paid
- 5. Project Topic
- 6. Location you made payment from