DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEX COAT)
ABSTRACT
The concept of this project is to actualize a practical way of paint production using a local design mixing machine which is designed to meet a low cost and high standard paint.
The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3 HP electric motor, chemically reacting reagents such as water, calcium carbonate, etc to produce the desired product which is aim to be used as coat for Mechanical Agricultural and Civil structures.
The project research exposes to students and entrepreneur to total knowledge necessary for the production of emulsion and texcoat using a single mixer irrespective of the volume of production.
Self help project is the only sustainable solution to the problem of unemployment. Many unemployed youth can lay their hiring. The project research is a modest presentation of simplified facts on the for entrepreneur success at a low coat.
TABLE OF CONTENTS
Title page
Letter of transmittal
Authority page
Certification
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
Introduction
Objectives of the research work
Uses and economics
Importance of study
Benefits of the project
CHAPTER TWO
Literature review
Historical
Design of mixing machine
Recognition of need
Definition of problem
Planning for production
Planning for use
Process of design
Factors that determine choice of material
Packaging of product (ames paint)
CHAPTER THREE
Design of machine/sequence of operation
Design and construction details
Design factors/construction of the principles
Construction procedures
CHAPTER FOUR
Paint production
Latex paint
White wash
Paint constituents for emulsion
Quality control
Chalking, abrasion, hardness & adherence
Formation of emulsion paint 20 litres
Formation of texcoat (20 litres)
Performance of the project
Conclusion
Recommendation
References
Do You Have New or Fresh Topic? Send Us Your Topic
DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
INSTRUCTIONS AFTER PAYMENT
- 1.Your Full name
- 2. Your Active Email Address
- 3. Your Phone Number
- 4. Amount Paid
- 5. Project Topic
- 6. Location you made payment from