Project Topic:
EVALUATION OF SOLID WASTE DISPOSAL METHOD (A CASE STUDY OF OKIGWE, IMO STATE)
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Human activities for satisfying needs such as food, shelter, clothing, mobility as well as aesthetic quality of life invariably lead to wastes being generated. These wastes generated need to be disposed off ultimately in such a way that it would not cause nuisance or any environmental pollution. As cities grow in size, with a rise in population, the amount of waste generated is increasingly becoming unmanageable. Wastes are any discarded materials, which can be solid, liquid, semi-solid or containerized gaseous materials (Achi, 2010). Solid waste is defined as discarded material which has no consumer value to the person abandoning it (Achi, 2010). This can be generated by either domestic commercial, industrial healthcare agricultural mineral places, etc. The words “garbage” “trash”, “refuses” and “rubbish” is used to refer to some forms of solid waste. The solid waste being generated in Okigwe, from each household is approximately 1 ton of domestic waste per year (ASME, 2011). The incidence of much garbage lying uncollected in the streets, dustbins, causing inconvenience and environmental pollution, and being a risk for public health in the study area is the main thrust of this study. Although, government authorities are trying to control this, hence the piles of wastes only seem to grow from day to day. The average per capital waste generation is 0.8kg per person per day (ASME, 2011). The problem is likely to intensify unless alternate approaches are developed. Solid waste is sticky and weighty in nature and therefore has the capacity of accumulating and defacing the physical environment if not well managed (Sada and Odemoerho, 1988). Solid waste is any moveable solid object which the owner wishes to dispose if it is no longer useful to the immediate owner. Solid wastes are non-soluble materials ranging from municipal garbage to industrial wastes containing complex and sometimes hazardous substances. Man’s activities today generates tons of thousands of refuse which are seen littered everywhere causing diverse environmental problems. This calls for urgent expertise in waste management as the importance of a healthy environment for meaningful and productive work is tied to proper waste management. Waste is everybody’s business as we all generate waste in nearly everything we do. In the past, waste was considered as a resource. This was because the waste that was generated was mainly agricultural and was bio-degradable and as such disposal was not a problem as the volume product was low and these agricultural wastes helped to enrich the soil. This is not the situation today as waste is a major problem that needs to be solved as urgently as possible rather than been considered as a resource. Over the years, studies have shown that rapid population growth and the growth of urban centres which followed the oil boom in the 1970s and industrialization came with a change in waste stream in Nigeria. This was as a result of increased use of goods to satisfy and meet the need of the teeming population resulting in the substantial increase in the amount of wastes generated. It is therefore important to note that waste generation and population growth work hand-in-hand. In Nigerian towns and cities, solid wastes of different kinds are generated and disposed off indiscriminately causing lots of environmental and health hazards. A good example of such cities includes Lagos, Kano, Calabar, Port Harcourt, Uyo, Aba, Yenagoa, etc. David (1985) noted that the issue of solid waste is not only familiar but assumed a global dimension in recent years causing series of environmental problems ranging from environmental degradation to pollution and imbalance, flooding, epidemics of infectious increase and decline in urban quality. Solid waste can be classified into two broad categories – biodegradable solid waste and non-biodegradable solid waste. Biodegradable wastes are those wastes that can be easily decomposed by natural process ranging from food remnants to leaves from trees, cotton wool, clothes, banana peels, papers, etc. On the other hand, non-biodegradable wastes are those wastes that cannot be broken down or decomposed by natural processes. They can however be recycled or reused. Such wastes include bottles, glasses, plastics, cans and wrappings of all kinds, nylon bags, metals, needles and syringes, woods, etc. Solid wastes can also be classified based on their level of environmental contamination that is whether they are hazardous or non-hazardous to both man and the environment. The sources from which wastes are generated ranges from municipal (street sweeping, sewage treatment plants, schools etc) to residential (flood wastes, plastics, vehicles, wood, glass etc), industrial (demolition materials, ashes etc) agricultural sources (spoiled food waste, pesticides, etc). Solid waste disposal can be carried out using several options but before any of these options can be adopted, three vital factors should be considered. Firstly, the physical characteristics of the locality as regards the topography of the area where waste management activities are to be carried out because waste disposal often requires a large parcel of land for an efficient operation especially of sanitary landfill is to be adopted; secondly, the character, quality and quantity of waste to be disposed of. The quantity and nature of household refuse varies greatly from region to region and thirdly, the financial allocation available as adequate budget any allocation must be available for capital outlay and running cost. Various waste management authorities requires different types of extensive refuse vehicles that cost a lot to maintain at the commencement of the operations and these vehicles do not often remain serviceable for long due to poor operation, maintenance and non-availability of spare parts. Solid waste disposal in the final placement, destruction of radioactive surplus, banned pesticides and chemicals, polluted soils and drums containing hazardous materials using approved methods. Several methods exist for the disposal of solid wastes and these range from open dumping to ocean/sea dumping, sanitary land filling composting, incineration, encapsulation, underground disposal and a more systematic method of waste management that includes recycling, reuse, recovery, segregation and reduction. Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity and the process is generally undertaken to reduce their effect on health, the environmental or aesthetics. This research work focuses mainly on the method of disposal of solid waste using the waste generated in Okigwe, Imo state as a case study. Wastes do not only threaten the beauty and aesthetics of the place but also the very health of its inhabitants. The intention of this research is to examine the strategies that are adopted in the disposal of solid waste in Okigwe, Imo state.
1.2 STATEMENT OF THE PROBLEM
The major problems man faces today is that of solid waste disposal and management as waste is seen being littered and scattered everywhere defacing the physical environment. Nobody likes to think of waste but the fact remains that solid waste is a pressing concern of our modern society. Over the years, the amount of the waste generated has grown steadily in part because of increasing population and more so because of changing life-styles and the increasing use of disposal materials. The challenges posed by this waste are that it is generated at a pace much faster than available means to manage it. The increasing rate at which waste is generated is 70% as compared to 30% of effective management and disposal methods. The problem of waste management in Nigeria is worsened by the ever-increasing population in the urban areas. The smell of offensive odours cannot be taken for granted. This problem is further compounded by hawkers who dump their waste indiscriminately everywhere. The indiscriminate littering of solid waste in our roads has reached an alarming rate. Evidence shows that the indiscriminate disposal of solid waste has a multiplicity effect on the environment. This greatly degrades the environment of its aesthetics and even causes diseases. The increased use of disposable plastics, cups and polythene materials for packaging goods have given rise to new waste disposal problems. Some of these materials are non-biodegradable and when burnt gives rise to air pollution. The rapid growth of population in Okigwe as people go in pursuit of greener pasture and exposure for a better tomorrow is posing a serious problem as regards waste generation. Dumping of refuse along street corners and the time lag in evacuating them constitutes another serious environmental health hazard in the study area. These refuse dumps serve as home for vermins such as flies, mosquitoes, cockroaches and other vectors of infectious disease. One of the greatest problems facing humanity today is that of waste management. In all cities and rural areas, waste disposed poses the greatest environmental problem. The rate, in which waste is generated, surpasses the rate at which it is evacuated. Upon this premises, one tends to wonder what could actually be responsible for this environmentally unfriendly character. Is it the orientation or the psychology of the people lack of central waste dumps or is it a deliberate attempt of polluting the environment or perhaps the various authorities responsible for waste disposal cannot cope with the volume of waste been generated?Another problem of solid waste management is the diversity of the waste being generated which results in a variety of potential health and welfare effects, the treatment of which is complicated by the fact that each type of waste often demands specific and yet different methods of disposal and management. Waste is an age-mate of mankind and part of the normal working system of man’s activity on the face of the earth. Though it is an integral constituent of all human activity, its presence today is becoming unbearable causing serious problems in the environment. Waste in ancient times was biodegradable and non-toxic and could hardly cause hazards. Today, copious waste generation pollutes many quarters even in rural areas. Every facet of man’s endeavour now face the danger of reckless thro-away; he wastes food, clothes, money, time, shoes, utensils, furniture, paper, machines, metals etc. It has now come to a point where solid waste stands face to face and side by side with man. The reason is man’s technology to master and conquer his world (environment). Even though the environmental sanitation and protection unit in Imo state and Okigwe in Particular is trying to maintain environmental sanitation, more needs to be done to manage the wastes been generated. The introduction of disposal containers and bins is a right step in solving or reducing this problem. However, these containers are often left to fill and spill garbage on the ground causing a very unpleasant sight. This results in irritation not to mention the offensive odours coming from such garbage area with the infestation of rats, cockroaches, insects, flies and other disease vectors and rodents. The need for this study arises as an urgency to update waste management strategies and also educate the residents of Okigwe on their attitude towards waste disposal especially those around the Metropolis.
1.3 AIMS AND OBJECTIVES OF STUDY
The major aim of the study is to evaluate solid waste disposal method in Okigwe, Imo state. Other specific objectives of the study include;
1. To determine the major components of waste generated in Okigwe, Imo state.
2. To examine the sources of solid waste in the study area
3. To assess the health and environmental impacts of improper waste disposal in the study area.
4. To examine the problems and prospects of solid waste management in Okigwe, Imo state
5. To examine the method of Waste Disposal by Households in Okigwe, Imo state
6. To make recommendations that would help in the management of waste in the study area.
1.4. RESEARCH QUESTIONS
1. What are the major components of waste generated in Okigwe, Imo state?
2. What are the sources of solid waste in the study area?
3. What are the health and environmental impacts of improper waste disposal in the study area?
4. What are the problems and prospects of solid waste management in Okigwe, Imo state?
5. What are the methods Waste Disposal by Households in Okigwe, Imo state?
6. What are the recommendations that would help in the management of waste in the study area?
1.5 RESEARCH HYPOTHESIS
H0: There is no significant health and environmental impacts of improper waste disposal in Okigwe, Imo state
H1: There is a significant health and environmental impacts of improper waste disposal in Okigwe, Imo state
1.6 SIGNIFICANCE OF THE STUDY
Sequel to recent trends in the demand for the useful information as regards solid waste disposal method and management, this research comes as an information pack that will be very useful to the general public as well as the authorities of the Okigwe L.G.A and Imo state as a whole as the problems of waste generation, disposal and management roots itself to everybody.
This research will be of immense benefit to the environmental sanitation and protection unit of Imo state, researchers and policy makers who may wish to carry out more research on the same problem.
1.7 SCOPE OF THE STUDY
The study is restricted to evaluate solid waste disposal method in Okigwe, Imo state.
1.8 LIMITATION OF THE STUDY
Financial constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet, questionnaire and interview)
Time constraint: The researcher will simultaneously engage in this study with other academic work. This consequently will cut down on the time devoted for the research work.
1.9 DEFINITION OF TERMS
Waste: derives from the Latin uastus, meaning to ravage, to leave desolate, or to fail to husband or cultivate. Hence, of the varieties of waste, ‘technical inefficiency’ is probably closest in meaning to traditional usage. ‘Technical inefficiency’ simply means that the managers of an entity fail to minimize cost or maximize output because they are not using the best technology available.
Waste disposal: is all the activities and actions required to manage waste from its inception to its final disposal. This includes amongst other things, collection, transport, treatment and disposal of waste together with monitoring and regulation. It also encompasses the legal and regulatory framework that relates to waste management encompassing guidance on recycling etc.
INSTRUCTIONS AFTER PAYMENT
- 1.Your Full name
- 2. Your Active Email Address
- 3. Your Phone Number
- 4. Amount Paid
- 5. Project Topic
- 6. Location you made payment from