DESIGN AND CONSTRUCTION OF DEAD MAN’S SWITCH
abstract
A dead man’s switch is a switch that is automatically operated if the human operator becomes incapacitated, such as through death, loss of consciousness, or being bodily removed from control. Originally applied to switches on a vehicle or machine, it has since come to be used to describe other intangible uses like in computer software.
These switches are usually used as a form of fail-safe where they stop a machine with no operator from potentially dangerous action. They are commonly used in this manner in locomotives, aircraft refueling, freight elevators, lawn mowers, tractors, personal watercraft, outboard motors, chainsaws, snowblowers, tread machines, snowmobiles, and many medical imaging devices.
On some machines, these switches merely bring the machines back to a safe state, such as reducing the throttle to idle or applying brakes while leaving the machines still running and ready to resume normal operation once control is reestablished. When the switch is an electrical one, it is usually wired as part of a series circuit.
Dead man’s switches are not always used to stop machines and prevent harm. These switches can also be used as a fail-deadly. A spring-operated switch can also be used to complete a circuit when it is no longer held down. This means that a dead man’s switch may be used to activate a harmful device, such as a bomb or IED.
The user holds down a switch of some sort in their hand which arms the device. The device will activate when the switch is released, so that if the user is killed while holding the switch, the bomb will detonate.
Do You Have New or Fresh Topic? Send Us Your Topic
TABLE OF CONTENT
Title page- – – – – – – – – i
Approval page – – – – – – – -ii
Dedication – – – – – – – – -iii
Acknowledgement – – – – – – – -iv
Abstract – – – – – – – – – -v
Table of content – – – – – – – -vi
CHAPTER ONE
INTRODUCTION – – – – – – – -1
1.0 Background of the study – – – – -1
1.1 Statement of the problem – – – – -5
1.2 Purpose of the study – – – – – -6
1.3 Significance of the study – – – – -8
1.4 Research questions – – – – – -9
1.5 Scope of the study – – – – – – -10
CHAPTER TWO
LITERATURE REVIEW – – – – – – -11
CHAPTER THREE
Research methodology – – – – – – -39
Design of study – – – – – – – -40
Area of study – – – – – – – – -40
Population of the study – – – – – – -41
Sample and sampling techniques – – – – -41
Instrument for data collection – – – – -41
Method of data collection – – – – – -42
Method of data analysis – – – – – – -43
CHAPTER FOUR
Presentation, analysis and interpretation of data – -48
Discussion of findings – – – – – – -56
CHAPTER FIVE
Summary of findings – – – – – – -60
Conclusion – – – – – – – – -61
Recommendations – – – – – – – -62
Suggestions for further research – – – – -64
References – – – – – – – – -65
Appendix I – – – – — – – – -68
Questionnaire. – – – – – – – -69
DESIGN AND CONSTRUCTION OF DEAD MAN’S SWITCH
INSTRUCTIONS AFTER PAYMENT
- 1.Your Full name
- 2. Your Active Email Address
- 3. Your Phone Number
- 4. Amount Paid
- 5. Project Topic
- 6. Location you made payment from